Several factors which influence timing and results in conventional cooking are exaggerated by microwave speed. From conventional cooking you are familiar with the idea that more food takes more time. Two cups of water take longer to boil than one. Size of food is important, too. Cut up potatoes cook faster than whole ones. These differences are more apparent in microwaving, since energy penetrates and turns to heat directly in the food. Knowing what affects the speed and evenness of cooking will help you enjoy all the advantages of microwave recipe

Piece Size : In both conventional and microwave cook-ing, small pieces cook faster than large ones. Pieces which are similar in size and shape cook more evenly.

Starting Temperature : Foods taken from the refrigera¬tor take longer to cook than foods at room temperature. Timings in our recipes are based on the temperatures at which you normally store the foods.

Density of Food : In both conventional and microwave cooking, dense foods, such as a potato, take longer to cook or heat than light, porous foods, such as a piece of cake, bread or a roll.

Quantity of Food : In both types of cooking, small amounts usually take less time than large ones. This is most apparent in microwave cooking, where time is di-rectly related to the number of servings.

Shape of Food : In both types of cooking, thin areas cook faster than thick ones. This can be controlled in micro-waving by placing thick pieces to the outside edge with thin pieces to the center.

Height in Oven : In both types of cooking, areas which are closest to the source of heat or energy cook faster. For even microwaving, turn over or shield vulnerable foods which are higher than 5 inches.

Boiling : Microwaves exaggerate boiling in milk-based foods. A temperature probe turns off the oven before foods boil over. Use a lower power setting and watch carefully when not using a probe.

Prick Foods to Release Pressure : Steam builds up pressure in foods which are tightly covered by a skin or membrane. Prick potatoes (as you do conventionally), egg yolks and chicken livers to prevent bursting.

Round Shapes : Since microwaves penetrate foods to about 1 -in. from top, bottom and sides, round shapes and rings cook more evenly. Corners receive more energy and may overcook. This may also happen con¬ventionally.

Bury Vulnerable Foods : Foods which attract microwave energy, such as cheese or meat, should, when possible, be buried in sauce or other ingredients. In conventional stewing or pot roasting, meat not covered with liquid dries out.

Visit as http://www.microwaverecipescookbook.com/

This article is free for republishing
Source: http://joemirth.articlealley.com/factors-which-affect-cooking-1790705.html

—

To kickstart your Canon TS3322 printer setup, you’ll need the appropriate drivers. These can be easily acquired from Canon’s official website without the need for an installation CD. Simply navigate to the support section, locate your printer model, and download the latest drivers. Here’s how to proceed:

Visit the official Canon website.
Go to the support section and find your printer model.
Select the download option to initiate the driver download.
Once the download is complete, open the file and select “Start Setup.” Follow the on-screen instructions to install the drivers and any necessary software on your computer.

Ensuring a Stable Network Connection
A reliable Wi-Fi connection is crucial for a smooth Canon TS3322 setup. Ensure that your network isn’t overloaded with devices, as this could hinder the automatic installation of printer drivers. Verify that your wireless router is correctly installed and that your computer is connected to a high-speed network. By doing so, you’ll facilitate a seamless connection between your devices and the printer.

Connecting Your Devices to the Printer
It’s important to avoid connecting too many devices to your printer simultaneously, as this can lead to malfunctions and disrupt the printing process. To establish a connection:

Connect your smartphone, Mac, or PC to the same network as the TS3322 printer.
Use your device to access the printer’s Wi-Fi network directly.
Send print, copy, and scan commands from any device connected to the wireless network.
Wireless Printing Made Simple
The Canon TS3322 allows for wireless printing without the need for a physical connection between your computer and the printer. Utilize the Wi-Fi Protected Setup (WPS) method for a hassle-free connection. The Canon Print App will guide you through connecting your smartphone to the same wireless router as the printer.

Detailed Wireless Network Setup Guide
For those looking to connect the Canon TS3322 to a wireless network, follow these steps:

Perform the initial setup of the Canon TS3322 wireless printer.
Use the WPS connection method to link the printer to your Wi-Fi network.
Follow the on-screen instructions provided by the Canon Print App or the printer’s setup guide.
Comprehensive Driver Installation Guide

If you encounter difficulties during the setup process, Canon’s customer support is available to assist you. For a successful installation, ensure that your PC or Mac is connected to the same network as the printer. You can also opt for a direct connection using a USB cable if preferred.

Troubleshooting Common Issues
When using the Canon TS3322, you may come across issues such as error TS3322 E03, Wi-Fi connectivity problems, or general malfunctions. To troubleshoot these problems, refer to the Canon Pixma TS3322 troubleshooting guide, which provides step-by-step solutions.

Additional Resources
For further assistance with your Canon TS3322 printer, explore the following resources:

Canon Printer Support
Canon Print App
By following this detailed guide, you should be able to set up your Canon TS3322 printer with ease and address any issues that arise. Enjoy the convenience of wireless printing and the high-quality output that Canon printers are known for.

Thinking about a manhood injury can be enough to make anyone – man or woman – cringe. That’s because the member is such a delicate organ, and any harm that might come to it is quite understandably painful. Fortunately for most men, the extent of manhood injury will be limited to irritation, redness and soreness, often from engaging in a little too many pleasurable activities. In this case, good male organ care is just what the doctor ordered.

But what if the manhood injury is more severe? Here’s what a guy needs to know.

Cuts or lacerations

Sometimes a man will have an accident with something sharp, and that can lead to cuts or lacerations, as well as a lot of bleeding. If this does happen, a guy should press down on the cut with a clean, dry cloth – a gauze pad is preferable – to stop the bleeding. Once the bleeding has stopped, keeping a bandage over the area is best.

If the bleeding won’t stop, the cut is rather deep or a guy is seeing signs of infection, such as fever or redness, it’s time to head to the doctor.

Zipper catches

This is one of the most common member injuries. And though it can hurt quite a bit, it’s relatively easy to fix. A guy should very carefully look at the member and decide whether the zipper might come loose with the help of some olive oil, mineral oil and the like. If it will come loose, he should carefully pull apart the zipper, taking care to stop if the pain becomes worse. Then simply clean the area well and keep it covered with a bandage while it heals.

However, if the zipper won’t come apart and a guy is in a lot of pain, it’s time to head to the emergency room. This will not be the first zipper manhood injury they have seen – nor will it be the last.

Allergies or insect bites

Nobody likes the idea of a mosquito or spider bite, especially on the member. And contact dermatitis, a reaction to something in the environment, is also not a fun time. Both these issues can be treated the same way, with a thorough cleansing of the area and an application of hydrocortisone cream (and over-the-counter dose should do just fine). However, if the spot becomes inflamed beyond what a man would expect from a typical bite, or there is any sign of pain or spreading of the redness, it’s time to go to the doctor to be safe.

Burn injuries

This is an injury that always requires a visit to the doctor. Minor burns can be treated at home with a thorough immersion of the area in lukewarm water to stop the damage, followed by a cool compress. If the burn is minor and superficial, visit the doctor as soon as possible. If the burn is serious, call emergency services to get to the closest medical center immediately.

Amputation

Speaking of cringe-worthy, this is the worst nightmare for many men. If it does happen, immediately call emergency services for help. Hold a compress on the area to control the bleeding. If the amputated part can be found, seal it in a zip-lock bag and then put that bag in a second bag filled with ice. Emergency surgery might be able to reattach it.

Everyday care

For everyday care of the most typical manhood injury – that aforementioned irritation, soreness and redness – a man should turn to good male organ care, which includes the use of a top-notch member health crème (health professionals recommend Man 1 Man Oil, which is clinically proven mild and safe for skin). A good crème will contain vitamins for healthy skin, antioxidants to fight against free radicals and amino acids to help aid in blood flow. Shea butter and vitamin E can help keep the member hydrated and ensure the skin stays as healthy as possible.

Visit http://www.menshealthfirst.com for additional information on most common member health issues, tips on improving manhood sensitivity and what to do to maintain a healthy male organ. John Dugan is a professional writer who specializes in men’s health issues and is an ongoing contributing writer to numerous websites.

—